[GeneralConstants] Radio1 = "1" Radio2 = "2" Radio3 = "3" Radio4 = "4" Radio5 = "5" Radio6 = "6" Radio7 = "7" Radio8 = "8" Radio9 = "9" Chosen = "ON" NotChosen = "OFF" [ProcessorID] ProcessorID_I386 = I386 ProcessorID_I486 = I486 ProcessorID_I586 = I586 ProcessorID_R4000 = R4000 ProcessorID_Alpha = Alpha_AXP [PlatformID] PlatformID_I386 = I386 PlatformID_Mips = Mips PlatformID_Alpha = Alpha [ProcessorVar] STF_PROCESSOR = "" ? $(!LIBHANDLE) GetProcessor [LanguageVar] STF_LANGUAGE = "" ? $(!LIBHANDLE) GetLanguage [UiVars] STF_NTDRIVE = "" STF_NTPATH = "" STF_WINDOWSPATH = "" ? $(!LIBHANDLE) GetWindowsNtDir STF_WINDOWSSYSPATH = "" ? $(!LIBHANDLE) GetWindowsNtSysDir STF_INSTALL_MODE = "CUSTOM" STF_INSTALL_TYPE = "MAINTENANCE" STF_UPGRADE = "YES" STF_CONTROLSET = "CurrentControlSet" STF_COMPUTERNAME = "" ? $(!LIBHANDLE) GetMyComputerName [SystemInformationClasses] Pointer Keyboard [VarsI386] DefaultVideo = "VGA" [VarsMips] DefaultVideo = "" [VarsAlpha] DefaultVideo = "VGA" [VideoVars] VideoHardwareDetected = "" ? $(!LIBHANDLE) GetMyVideoType VideoSystemSet = "" ? $(!LIBHANDLE) GetSelectedVideo VideoDefault = $(DefaultVideo) VideoOurINFOptions = {} VideoOemINFOptions = {} VideoMergedOptions = {} VideoSpecialOption = {} VideoCurrentOption = {} VideoOptionList = {} VideoOptionTextList = {} VideoOption = {} VideoINF = "" VideoInstall = "NO" VideoSrcDir = "" VideoDstDir = "" [PointerVars] PointerHardwareDetected = "" ? $(!LIBHANDLE) GetMyPointerType PointerSystemSet = "" ? $(!LIBHANDLE) GetSelectedPointer PointerDefault = "" PointerOurINFOptions = {} PointerOemINFOptions = {} PointerMergedOptions = {} PointerSpecialOption = {} PointerCurrentOption = {} PointerOptionList = {} PointerOptionTextList = {} PointerOption = {} PointerINF = "" PointerInstall = "NO" PointerSrcDir = "" PointerDstDir = "" [KeyboardVars] KeyboardHardwareDetected = "" ? $(!LIBHANDLE) GetMyKeyboardType KeyboardSystemSet = "" ? $(!LIBHANDLE) GetSelectedKeyboard KeyboardDefault = "PCAT_ENHANCED" KeyboardOurINFOptions = {} KeyboardOemINFOptions = {} KeyboardMergedOptions = {} KeyboardSpecialOption = {} KeyboardCurrentOption = {} KeyboardOptionList = {} KeyboardOptionTextList = {} KeyboardOption = {} KeyboardINF = "" KeyboardInstall = "NO" KeyboardSrcDir = "" KeyboardDstDir = "" [Shell Commands] Set !G:DebugOutputControl = 0 set Exit_Code = $(!SETUP_ERROR_GENERAL) set DrivesToFree = {} set-title "Windows NT Setup" LoadLibrary "x" $(!STF_CWDDIR)\setupdll.dll !LIBHANDLE set-subst LF = "\n" set Reboot = NO StartWait read-syms GeneralConstants read-syms LanguageVar detect LanguageVar read-syms Strings$(!STF_LANGUAGE) read-syms ProcessorID read-syms PlatformID read-syms ProductType read-syms ProcessorVar detect ProcessorVar ifstr(i) $(STF_PROCESSOR) == $(ProcessorID_I386) ifstr(i) $(STF_PLATFORM) != $(PlatformID_I386) else-ifstr(i) $(STF_PROCESSOR) == $(ProcessorID_I486) else-ifstr(i) $(STF_PROCESSOR) == $(ProcessorID_I586) else-ifstr(i) $(STF_PROCESSOR) == $(ProcessorID_R4000) else-ifstr(i) $(STF_PROCESSOR) == $(ProcessorID_Alpha) else endif read-syms Vars$(!STF_PLATFORM) set STF_SRCDIR = A:\ shell "registry.inf" GetNTSource ifint $($ShellCode) != $(!SHELL_CODE_OK) else-ifstr(i) $($R0) != STATUS_SUCCESSFUL else set STF_SRCDIR = $($R1) endif shell "subroutn.inf" PushBillboard STATUSDLG $(String15) read-syms UiVars detect UiVars set !STF_NTPATH = $(!STF_WINDOWSSYSPATH) GetDriveInPath !STF_NTDRIVE $(!STF_WINDOWSSYSPATH) shell "subroutn.inf" ReadSetupHelpIds SetHelpFile "setupnt.hlp" $(!MinimumID) $(!MaximumID) set ConfigureOptions = {} read-syms OemOptionDiskettes$(!STF_LANGUAGE) set OptionTypeList = {Pointer, Keyboard} ForListDo $(OptionTypeList) read-syms $($)Vars detect $($)Vars EndForListDo ForListDo $(OptionTypeList) shell "hardware.inf" InitOptionVars $(!STF_LANGUAGE) $($) $($($)HardwareDetected) $($($)SystemSet) $($($)Default) ifstr(i) $($R0) == "STATUS_SUCCESSFUL" set $($)OurINFOptions = $($R1) set $($)OemINFOptions = $($R2) set $($)MergedOptions = $($R3) set $($)SpecialOption = $($R4) set $($)CurrentOption = $($R5) set $($)Option = *($($R5), 1) set $($)NewOption = *($($R5), 1) else shell "subroutn.inf" PopBillboard EndWait shell "subroutn.inf" SetupMessage $(!STF_LANGUAGE) "FATAL" $(String1) StartWait goto end endif EndForListDo ForListDo $(OptionTypeList) shell "hardware.inf" InitListBoxVars $(!STF_LANGUAGE) $($($)MergedOptions) $($($)SpecialOption) $(Other) ifstr(i) $($R0) == "STATUS_SUCCESSFUL" set $($)OptionList = $($R1) set $($)OptionTextList = $($R2) else shell "subroutn.inf" PopBillboard EndWait shell "subroutn.inf" SetupMessage $(!STF_LANGUAGE) "FATAL" $(String2) StartWait goto end endif EndForListDo EndWait shell "subroutn.inf" PopBillboard maintenance = + read-syms MaintDlg$(!STF_LANGUAGE) EndWait ui start "Maintenance" ifstr(i) $(DLGEVENT) == "CONTINUE" set Exit_Code = $(!SETUP_ERROR_SUCCESS) set Status = STATUS_SUCCESSFUL ui pop 1 goto end else-ifstr(i) $(DLGEVENT) == "EXIT" set Exit_Code = $(!SETUP_ERROR_SUCCESS) set Status = STATUS_USERQUIT ui pop 1 goto end else-ifstr(i) $(DLGEVENT) == "SYSTEM" shell "registry.inf" CheckSetupModify ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "shelling CheckSetupModify failed" set Reinit = NO goto maintenance else-ifstr(i) $($R0) != STATUS_SUCCESSFUL shell "subroutn.inf" SetupMessage $(!STF_LANGUAGE) "NONFATAL" $(String7) set ReInit = NO goto maintenance endif StartWait ForListDo $(OptionTypeList) set $($)NewOption = $($($)Option) EndForListDo goto system else-ifstr(i) $(DLGEVENT) == "APPINSTALL" StartWait shell "registry.inf" CheckSetupModify ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "shelling CheckSetupModify failed" set Reinit = NO goto maintenance else-ifstr(i) $($R0) != STATUS_SUCCESSFUL EndWait shell "subroutn.inf" SetupMessage $(!STF_LANGUAGE) "NONFATAL" $(String7) StartWait set ReInit = NO goto maintenance endif shell "app.inf" DoAppSearch set ReInit = NO goto maintenance else-ifstr(i) $(DLGEVENT) == "ADDREMOVE" StartWait set DoPartial = YES shell "partial.inf" MaintainProgmanComponents set ReInit = NO goto maintenance else-ifstr(i) $(DLGEVENT) == "ADDREMOVESCSI" StartWait shell "" DoDriverInstall "SCSI" set ReInit = NO goto maintenance else-ifstr(i) $(DLGEVENT) == "ADDREMOVETAPE" StartWait shell "" DoDriverInstall "Tape" set ReInit = NO goto maintenance else-ifstr(i) $(DLGEVENT) == "PROFILE" StartWait shell "" DoProfiles ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "shelling DoProfiles failed" endif set ReInit = NO goto maintenance else ui pop 1 goto end endif system = + read-syms SystemDlg$(!STF_LANGUAGE) EndWait ui start "System" ifstr(i) $(DLGEVENT) == "CONTINUE" StartWait ForListDo $(OptionTypeList) set Option = $($) ifstr(i) $($(Option)Option) != $($(Option)NewOption) ifstr(i) $($(Option)SpecialOption) != {} ifstr(i) $($(Option)NewOption) == *($($(Option)SpecialOption), 1) goto skip_install endif endif shell "hardware.inf" GetOptionFile $($(Option)NewOption) $($(Option)OemINFOptions) ifstr(i) $($R0) == "STATUS_SUCCESSFUL" set $(Option)INF = $(!STF_WINDOWSSYSPATH)"\"$($R1) set $(Option)SrcDir = $($(Option)DisketteSrc) goto do_install endif shell "hardware.inf" GetOptionFile $($(Option)NewOption) $($(Option)OurINFOptions) ifstr(i) $($R0) == "STATUS_SUCCESSFUL" set $(Option)INF = $($R1) set $(Option)SrcDir = $(!STF_SRCDIR) goto do_install endif do_install = + shell $($(Option)INF) InstallOption $(!STF_LANGUAGE) $($(Option)NewOption) $($(Option)SrcDir) "YES" "YES" "YES" ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "Shelling installOption "$($(Option)NewOption)" in INF "$($(Option)INF)" failed" goto skip_install endif ifstr(i) $($R0) != STATUS_SUCCESSFUL Debug-Output "InstallOption "$($(Option)NewOption)" in INF "$($(Option)INF)" failed" goto skip_install endif shell "registry.inf" MakeSetupOptionEntry $(Option) $($(Option)NewOption) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "shelling MakeSetupOptionEntry failed" goto skip_install endif ifstr(i) $($R0) != STATUS_SUCCESSFUL Debug-Output "Making setup entry for "$(Option)" = "$($(Option)NewOption)" failed." goto skip_install endif set $(Option)Option = $($(Option)NewOption) set Reboot = YES skip_install = + endif EndForListDo ui pop 1 set ReInit = YES goto maintenance else-ifstr(i) $(DLGEVENT) == "NOTIFY" set OptionNum = $(ButtonChecked) set Option = *($(OptionTypeList), $(ButtonChecked)) set ReInit = YES ifstr(i) $(Combo$(OptionNum)Out) != $(Other) set $(Option)NewOption = *($($(Option)OptionList), ~($(Combo$(OptionNum)List), $(Combo$(OptionNum)Out))) set ReInit = NO else shell "other.inf" GetNewOEMOption $(!STF_LANGUAGE) $($(Option)OemINFOptions) $(Option) $($(Option)DisketteSrc) ifstr(i) $($R0) == STATUS_SUCCESSFUL set $(Option)OemINFOptions = $($R1) set $(Option)NewOption = $($R2) set $(Option)DisketteSrc = $($R4) shell "hardware.inf" MergeOptions $($(Option)OurINFOptions) $($(Option)OemINFOptions) ifstr(i) $($R0) == STATUS_SUCCESSFUL set $(Option)MergedOptions = {$($R1), $($R2)} else shell "subroutn.inf" SetupMessage $(!STF_LANGUAGE) "FATAL" $(String4) ui pop 1 goto finish_system endif shell "hardware.inf" InitListBoxVars $(!STF_LANGUAGE) $($(Option)MergedOptions) $($(Option)SpecialOption) $(Other) ifstr(i) $($R0) == "STATUS_SUCCESSFUL" set $(Option)OptionList = $($R1) set $(Option)OptionTextList = $($R2) else shell "subroutn.inf" SetupMessage $(!STF_LANGUAGE) "FATAL" $(String2) ui pop 1 goto finish_system endif else-ifstr(i) $($R0) == "STATUS_USERCANCEL" set ReInit = YES goto system else shell "subroutn.inf" SetupMessage $(!STF_LANGUAGE) "NONFATAL" $(String3) set ReInit = YES goto system endif endif goto system else-ifstr(i) $(DLGEVENT) == "BACK" ui pop 1 set ReInit = YES goto maintenance else ui pop 1 set ReInit = YES goto maintenance endif finish_system = + set ReInit = YES goto maintenance end = + ForListDo $(DrivesToFree) LibraryProcedure STATUS,$(!LIBHANDLE), DeleteNetConnection $($) "TRUE" EndForListDo ifstr(i) $(Reboot) == "YES" shell "subroutn.inf" SetupMessage $(!STF_LANGUAGE) "STATUS" $(String6) endif FreeLibrary $(!LIBHANDLE) exit [DoProfiles] set Status = STATUS_FAILED read-syms ProfileStrings$(!STF_LANGUAGE) read-syms ProfileVars detect ProfileVars ifstr(i) $(!STF_COMPUTERNAME) == "" set !STF_COMPUTERNAME = $(String1) endif ifstr(i) $(UserAccounts) == {} shell "subroutn.inf" SetupMessage $(!STF_LANGUAGE) "STATUS" $(String2) set Status = STATUS_SUCCESSFUL goto finish_doprofiles endif set UserProfileList = {} ForListDo $(UserAccounts) set UserProfileList = >($(UserProfileList), *($($), 2)) EndForListDo profile_rst =+ read-syms ProfileDlg$(!STF_LANGUAGE) EndWait ui start "Profile" ifstr(i) $(DLGEVENT) == "CONTINUE" set Status = STATUS_SUCCESSFUL ui pop 1 goto finish_doprofiles else-ifstr(i) $(DLGEVENT) == "FREEBUTTON1" ifstr(i) $(ListItemsOut) == "" shell "subroutn.inf" SetupMessage $(!STF_LANGUAGE) "NONFATAL" $(String3) set ReInit = NO goto profile_rst else-ifstr(i) $(ListItemsOut) == $(UserName) shell "subroutn.inf" SetupMessage $(!STF_LANGUAGE) "NONFATAL" $(String7) set ReInit = NO goto profile_rst endif set UserProfileFile = "" ForListDo $(UserAccounts) ifstr(i) *($($), 2) == $(ListItemsOut) set UserProfileKey = *($($), 1) set UserProfileFile = *($($), 3) endif EndForListDo LibraryProcedure STATUS, $(!LIBHANDLE), DeleteUserProfile $(UserProfileFile) $(UserProfileKey) ifstr(i) $(STATUS) == "YES" set NewUserProfileList = {} ForListDo $(UserProfileList) ifstr(i) $($) != $(ListItemsOut) set NewUserProfileList = >($(NewUserProfileList), $($)) endif EndForListDo set UserProfileList = $(NewUserProfileList) set ReInit = YES goto profile_rst else-ifstr(i) $(STATUS) == "ERROR_PRIVILEGE" shell "subroutn.inf" SetupMessage $(!STF_LANGUAGE) "NONFATAL" $(String4) set ReInit = NO goto profile_rst else-ifstr(i) $(STATUS) == "ERROR_ACTIVE" shell "subroutn.inf" SetupMessage $(!STF_LANGUAGE) "NONFATAL" $(String5) set ReInit = NO goto profile_rst else shell "subroutn.inf" SetupMessage $(!STF_LANGUAGE) "NONFATAL" $(String6) set ReInit = NO goto profile_rst endif else ui pop 1 goto finish_doprofiles endif finish_doprofiles = + StartWait Return $(Status) [ProfileVars] UserAccounts = {} ? $(!LIBHANDLE) GetUserAccounts UserName = "" ? $(!LIBHANDLE) GetMyUserName UserProfileList = {} UserProfile = "" [DoDriverInstall] set Status = STATUS_FAILED read-syms Strings$(!STF_LANGUAGE) read-syms $($0)Strings$(!STF_LANGUAGE) set OptionType = $($0) set DisketteSrc = "A:\" shell "hardware.inf" InitOptionVars $(!STF_LANGUAGE) $(OptionType) "" "" "" ifstr(i) $($R0) == "STATUS_SUCCESSFUL" set OurINFOptions = $($R1) set OemINFOptions = $($R2) set MergedOptions = $($R3) else EndWait shell "subroutn.inf" SetupMessage $(!STF_LANGUAGE) "FATAL" $(String1) StartWait goto end endif set DeviceInfFiles = {} ForListDo $(OurINFOptions) set DeviceInfFiles = >($(DeviceInfFiles), *($($), 1)) EndForListDo ForListDo $(OemINFOptions) set DeviceInfFiles = >($(DeviceInfFiles), *($($), 1)) EndForListDo set InstalledList = {} set InstalledTextList = {} ForListDo $(DeviceInfFiles) shell $($) GetInstalledOptions $(!STF_LANGUAGE) ifint $($ShellCode) == $(!SHELL_CODE_OK) ifstr(i) $($R0) == STATUS_SUCCESSFUL ForListDo $($R1) set InstalledList = >($(InstalledList), $($)) set InstalledTextList = >($(InstalledTextList), *($($R2), $(#))) EndForListDo endif endif EndForListDo set CurrentInstalledOption = "" set CurrentInstalledOptionText = "" shell "hardware.inf" InitListBoxVars $(!STF_LANGUAGE) $(MergedOptions) {} $(Other) ifstr(i) $($R0) == "STATUS_SUCCESSFUL" set OptionList = $($R1) set OptionTextList = $($R2) Debug-Output "Option text list: "$(OptionTextList) set NewOption = *($($R1), 1) else EndWait shell "subroutn.inf" SetupMessage $(!STF_LANGUAGE) "FATAL" $(String2) StartWait goto finish_DoDriverInstall endif driver_install = + read-syms DriverInstall$(!STF_LANGUAGE) EndWait ui start "DriverInstall" ifstr(i) $(DLGEVENT) == "CONTINUE" set Status = STATUS_SUCCESSFUL ui pop 1 goto finish_DoDriverInstall else-ifstr(i) $(DLGEVENT) == "FREEBUTTON1" Debug-Output "Add Selected" shell "registry.inf" CheckSetupModify ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "shelling CheckSetupModify failed" set Reinit = NO goto driver_install else-ifstr(i) $($R0) != STATUS_SUCCESSFUL shell "subroutn.inf" SetupMessage $(!STF_LANGUAGE) "NONFATAL" $(String7) set ReInit = NO goto driver_install endif ifstr(i) $(OptionType) == "scsi" shell "subroutn.inf" SetupMessage $(!STF_LANGUAGE) "WARNING" $(OptionString50) ifstr(i) $($R0) != STATUS_SUCCESSFUL set ReInit = NO goto driver_install endif ifstr(i) $($R1) == "CANCEL" set ReInit = NO goto driver_install endif endif goto adddriver set ReInit = YES goto driver_install else-ifstr(i) $(DLGEVENT) == "FREEBUTTON2" Debug-Output "Remove Selected" ifstr(i) $(ListItemsOut) == "" shell "subroutn.inf" SetupMessage $(!STF_LANGUAGE) "NONFATAL" $(OptionString1) set ReInit = NO goto driver_install endif set CurrentInstalledOptionText = $(ListItemsOut) shell "registry.inf" CheckSetupModify ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "shelling CheckSetupModify failed" set Reinit = NO goto driver_install else-ifstr(i) $($R0) != STATUS_SUCCESSFUL shell "subroutn.inf" SetupMessage $(!STF_LANGUAGE) "NONFATAL" $(String7) set ReInit = NO goto driver_install endif shell "subroutn.inf" SetupMessage $(!STF_LANGUAGE) "WARNING" $(OptionString3) ifstr(i) $($R0) != STATUS_SUCCESSFUL set ReInit = NO goto driver_install endif ifstr(i) $($R1) == "CANCEL" set ReInit = NO goto driver_install endif set OptionToRemove = *($(InstalledList), ~($(InstalledTextList), $(ListItemsOut))) shell "hardware.inf" GetOptionFile $(OptionToRemove) $(OemINFOptions) ifstr(i) $($R0) == "STATUS_SUCCESSFUL" set INF = $(!STF_WINDOWSSYSPATH)"\"$($R1) goto do_removal endif shell "hardware.inf" GetOptionFile $(OptionToRemove) $(OurINFOptions) ifstr(i) $($R0) == "STATUS_SUCCESSFUL" set INF = $(!STF_WINDOWSSYSPATH)"\"$($R1) goto do_removal endif set ReInit = NO goto driver_install do_removal = + shell $(INF) DeInstallOption $(!STF_LANGUAGE) $(OptionToRemove) ifint $($ShellCode) != $(!SHELL_CODE_OK) shell "subroutn.inf" SetupMessage $(!STF_LANGUAGE) "NONFATAL" $(OptionString5) set Reinit = NO goto driver_install else-ifstr(i) $($R0) != STATUS_SUCCESSFUL shell "subroutn.inf" SetupMessage $(!STF_LANGUAGE) "NONFATAL" $(OptionString5) set ReInit = NO goto driver_install endif set NewInstalledList = {} set NewInstalledTextList = {} ForListDo $(InstalledList) ifstr(i) $($) != $(OptionToRemove) set NewInstalledList = >($(NewInstalledList), $($)) set NewInstalledTextList = >($(NewInstalledTextList), *($(InstalledTextList), $(#))) endif EndForListDo set InstalledList = $(NewInstalledList) set InstalledTextList = $(NewInstalledTextList) set CurrentInstalledOptionText = "" set !Reboot = YES set ReInit = YES goto driver_install else ui pop 1 goto finish_DoDriverInstall endif adddriver =+ read-syms SelectDriverDlg$(!STF_LANGUAGE) ui start "SelectDriver" ifstr(i) $(DLGEVENT) == "CONTINUE" Ifcontains(i) $(NewOption) in $(InstalledList) shell "subroutn.inf" SetupMessage $(!STF_LANGUAGE) "NONFATAL" $(OptionString2) set ReInit = "NO" goto adddriver endif shell "hardware.inf" GetOptionFile $(NewOption) $(OemINFOptions) ifstr(i) $($R0) == "STATUS_SUCCESSFUL" set INF = $(!STF_WINDOWSSYSPATH)"\"$($R1) set SrcDir = $(DisketteSrc) goto do_driver_install endif shell "hardware.inf" GetOptionFile $(NewOption) $(OurINFOptions) ifstr(i) $($R0) == "STATUS_SUCCESSFUL" set INF = $(!STF_WINDOWSSYSPATH)"\"$($R1) set SrcDir = $(!STF_SRCDIR) goto do_driver_install endif do_driver_install = + shell $(INF) InstallOption $(!STF_LANGUAGE) $(NewOption) $(SrcDir) "YES" "YES" "YES" ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "Shelling installOption "$(NewOption)" in INF "$(INF)" failed" shell "subroutn.inf" SetupMessage $(!STF_LANGUAGE) "NONFATAL" $(OptionString4) goto skip_driver_install endif ifstr(i) $($R0) != STATUS_SUCCESSFUL Debug-Output "InstallOption "$(NewOption)" in INF "$(INF)" failed" shell "subroutn.inf" SetupMessage $(!STF_LANGUAGE) "NONFATAL" $(OptionString4) goto skip_driver_install endif set !Reboot = YES set InstalledList = >($(InstalledList), $(NewOption)) set InstalledTextList = >($(InstalledTextList), *($(OptionTextList), ~($(OptionList), $(NewOption)))) set CurrentInstalledOptionText = "" skip_driver_install = + ui pop 1 set ReInit = YES goto driver_install else-ifstr(i) $(DLGEVENT) == "NOTIFY" set ReInit = YES ifstr(i) $(Combo1Out) != $(Other) set NewOption = *($(OptionList), ~($(Combo1List), $(Combo1Out))) set ReInit = NO else shell "other.inf" GetNewOEMOption $(!STF_LANGUAGE) $(OemINFOptions) $(OptionType) $(DisketteSrc) ifstr(i) $($R0) == STATUS_SUCCESSFUL set OemINFOptions = $($R1) set NewOption = $($R2) set DisketteSrc = $($R4) shell "hardware.inf" MergeOptions $(OurINFOptions) $(OemINFOptions) ifstr(i) $($R0) == STATUS_SUCCESSFUL set MergedOptions = {$($R1), $($R2)} else shell "subroutn.inf" SetupMessage $(!STF_LANGUAGE) "FATAL" $(String4) ui pop 1 goto finish_system endif shell "hardware.inf" InitListBoxVars $(!STF_LANGUAGE) $(MergedOptions) {} $(Other) ifstr(i) $($R0) == "STATUS_SUCCESSFUL" set OptionList = $($R1) set OptionTextList = $($R2) else shell "subroutn.inf" SetupMessage $(!STF_LANGUAGE) "FATAL" $(String2) ui pop 1 goto finish_system endif else-ifstr(i) $($R0) == "STATUS_USERCANCEL" set ReInit = YES goto adddriver else shell "subroutn.inf" SetupMessage $(!STF_LANGUAGE) "NONFATAL" $(String3) set ReInit = YES goto adddriver endif endif goto adddriver else-ifstr(i) $(DLGEVENT) == "BACK" ui pop 1 set ReInit = NO goto driver_install else ui pop 1 set ReInit = NO goto driver_install endif finish_DoDriverInstall =+ StartWait Return $(Status) [Source Media Descriptions] 1 = "Windows NT Workstation CD-ROM or Setup Disk #4" , TAGFILE = disk1.w 2 = "Windows NT Workstation CD-ROM or Setup Disk #5" , TAGFILE = disk2.w 3 = "Windows NT Workstation CD-ROM or Setup Disk #6" , TAGFILE = disk3.w 4 = "Windows NT Workstation CD-ROM or Setup Disk #7" , TAGFILE = disk4.w 5 = "Windows NT Workstation CD-ROM or Setup Disk #8" , TAGFILE = disk5.w 6 = "Windows NT Workstation CD-ROM or Setup Disk #9" , TAGFILE = disk6.w 7 = "Windows NT Workstation CD-ROM or Setup Disk #10", TAGFILE = disk7.w 8 = "Windows NT Workstation CD-ROM or Setup Disk #11", TAGFILE = disk8.w 9 = "Windows NT Workstation CD-ROM or Setup Disk #12", TAGFILE = disk9.w 10 = "Windows NT Workstation CD-ROM or Setup Disk #13", TAGFILE = disk10.w 11 = "Windows NT Workstation CD-ROM or Setup Disk #14", TAGFILE = disk11.w 12 = "Windows NT Workstation CD-ROM or Setup Disk #15", TAGFILE = disk12.w 13 = "Windows NT Workstation CD-ROM or Setup Disk #16", TAGFILE = disk13.w 14 = "Windows NT Workstation CD-ROM or Setup Disk #17", TAGFILE = disk14.w 15 = "Windows NT Workstation CD-ROM or Setup Disk #18", TAGFILE = disk15.w 16 = "Windows NT Workstation CD-ROM or Setup Disk #19", TAGFILE = disk16.w 17 = "Windows NT Workstation CD-ROM or Setup Disk #20", TAGFILE = disk17.w 18 = "Windows NT Workstation CD-ROM or Setup Disk #21", TAGFILE = disk18.w 19 = "Windows NT Workstation CD-ROM or Setup Disk #22", TAGFILE = disk19.w 20 = "Windows NT Workstation CD-ROM or Setup Disk #23", TAGFILE = disk20.w 21 = "Windows NT Workstation CD-ROM or Setup Disk #24", TAGFILE = disk21.w 22 = "Windows NT Workstation CD-ROM or Setup Disk #25", TAGFILE = disk22.w 23 = "Windows NT Workstation CD-ROM or Setup Disk #26", TAGFILE = disk23.w 24 = "Windows NT Workstation CD-ROM or Setup Disk #27", TAGFILE = disk24.w 25 = "Windows NT Workstation CD-ROM or Setup Disk #28", TAGFILE = disk25.w 26 = "Windows NT Workstation CD-ROM or Setup Disk #29", TAGFILE = disk26.w 27 = "Windows NT Workstation CD-ROM or Setup Disk #30", TAGFILE = disk27.w 28 = "Windows NT Workstation CD-ROM or Setup Disk #31", TAGFILE = disk28.w 29 = "Windows NT Workstation CD-ROM or Setup Disk #32", TAGFILE = disk29.w 30 = "Windows NT Workstation CD-ROM or Setup Disk #33", TAGFILE = disk30.w [Signature] FileType = MICROSOFT_FILE [GetSignature] read-syms Signature return $(FileType) [ProductType] STF_PRODUCT = Winnt STF_PLATFORM = I386 [LanguageID] ENG [LanguageTextENG] "English (American)" [OemOptionDiskettesENG] VideoDisketteSrc = "A:\" PointerDisketteSrc = "A:\" KeyboardDisketteSrc = "A:\" [StringsENG] Other = "Other (Requires a disk from a hardware manufacturer)" String1 = "Failed to initialize hardware options." String2 = "Failed to initialize hardware variables." String3 = "Failed to obtain new options. Ignoring the error." String4 = "Internal Setup error: failed to merge Microsoft options with the OEM options." String5 = "Setup cannot install on the current processor."$(!LF)$(!LF)"Cannot proceed with install." String6 = "The changes you have made will not take effect until the computer is restarted." String7 = "You do not have permission to carry out this operation." String8 = "Setup needs to initialize its hardware configuration entries. "+ "Please log on as a member of the Administrators group and run Setup again." String9 = "No driver selected for removal." String10 = "The driver selected is already installed." String11 = "Are you sure you want to remove the selected driver?" String12 = "Failed to install selected driver." String13 = "Failed to remove selected driver." String14 = "The SETUP.INF file does not match your computer." String15 = "Please wait while Setup determines your hardware configuration..." [MaintDlgENG] Caption = "Windows NT Setup" DlgType = Maintenance DlgTemplate = DLG_MAINTAIN HelpContext = $(!IDH_DB_MAINTAIN_INS) PointerText = *($(PointerOptionTextList), ~($(PointerOptionList), $(PointerOption))) KeyboardText = *($(KeyboardOptionTextList), ~($(KeyboardOptionList), $(KeyboardOption))) TextFields = {$(PointerText), $(KeyboardText)} [SystemDlgENG] Caption = "Change Mouse or Keyboard" Continue = "Close" Cancel = "Cancel" Help = "&Help" Combo1Label = "&Mouse:" Combo2Label = "&Keyboard:" DlgType = "MultiCombo" DlgTemplate = "M_SYSTEM" HelpContext = $(!IDH_DB_MSYSTEM_INS) Combo1List = $(PointerOptionTextList) Combo1Out = *($(Combo1List), ~($(PointerOptionList), $(PointerNewOption))) Combo2List = $(KeyboardOptionTextList) Combo2Out = *($(Combo2List), ~($(KeyboardOptionList), $(KeyboardNewOption))) ComboListItemsIn = { Combo1List, Combo2List } ComboListItemsOut = { Combo1Out, Combo2Out } NotifyFields = { YES, YES, YES } [ProfileStringsENG] String1 = "this machine" String2 = "No user profiles were found on this machine." String3 = "No user profile selected for deletion." String4 = "Setup is unable to delete the user profile indicated. "+ "You do not have permission to carry out this operation." String5 = "Setup couldn't delete the user profile indicated. The profile "+ "may be currently being used by Windows NT." String6 = "Setup couldn't delete the user profile indicated." String7 = "Setup cannot delete the currently active profile." String8 = "Unknown User" [ProfileDlgENG] Caption = "Delete User Profiles" DlgText = "User &Profiles on "$(!STF_COMPUTERNAME)":" Continue = "Close" Cancel = "Cancel" Delete = "&Delete" Help = "&Help" Exit = "&Exit" DlgType = "List" DlgTemplate = "PROFILE" HelpContext = $(!IDH_DB_MPROFILE_INS) ListItemsIn = $(UserProfileList) ListItemsOut = $(UserProfile) [SCSIStringsENG] OptionString1 = "No SCSI Adapter selected for removal." OptionString2 = "The SCSI Adapter selected is already installed." OptionString3 = "Removing SCSI Adapters may prevent Windows NT "+ "from starting correctly. Before restarting your computer, "+ "check the Read Me item in the Main program group for "+ "information about reconfiguring SCSI Adapters."$(!LF)$(!LF)+ "If Windows NT fails to start, you can recover by using the "+ "Last Known Good Configuration. See your System Guide for "+ "more information."$(!LF)$(!LF)+ "Are you sure you want to remove the selected SCSI Adapter?" OptionString4 = "Failed to install selected SCSI Adapter." OptionString5 = "Failed to remove selected SCSI Adapter." OptionString6 = "SCSI Adapter Setup" OptionString7 = "SCSI A&dapters installed on "$(!STF_COMPUTERNAME)":" OptionString8 = "Select SCSI Adapter Option" OptionString9 = "Choose a SCSI Adapter from the following list:" OptionString10 = "A&dapter:" OptionString50 = "Adding SCSI Adapters may prevent Windows NT "+ "from starting correctly. Before restarting your computer, "+ "check the Read Me item in the Main program group for "+ "information about reconfiguring SCSI Adapters."$(!LF)$(!LF)+ "If Windows NT fails to start, you can recover by using the "+ "Last Known Good Configuration. See your System Guide for "+ "more information."$(!LF)$(!LF)+ "Are you sure you want to add a SCSI Adapter?" !HelpID1 = $(!IDH_DB_SCSI_DRIVER_INS) !HelpID2 = $(!IDH_DB_SCSI_SELECTDRIVER_INS) [TapeStringsENG] OptionString1 = "No Tape Device selected for removal." OptionString2 = "The Tape Device selected is already installed." OptionString3 = "Are you sure you want to remove the selected Tape Device?" OptionString4 = "Failed to install selected tape device." OptionString5 = "Failed to remove selected tape device." OptionString6 = "Tape Device Setup" OptionString7 = "Tape &Devices installed on "$(!STF_COMPUTERNAME)":" OptionString8 = "Select Tape Device Option" OptionString9 = "Choose a Tape Device from the following list:" OptionString10 = "&Device:" !HelpID1 = $(!IDH_DB_TAPE_DRIVER_INS) !HelpID2 = $(!IDH_DB_TAPE_SELECTDRIVER_INS) [DriverInstallENG] Caption = $(OptionString6) Continue = "Close" Add = "&Add..." Remove = "&Remove" Help = "&Help" DlgType = "List" DlgTemplate = "DRIVERINSTALL" DlgText = $(OptionString7) HelpContext = $(!HelpID1) ListItemsIn = $(InstalledTextList) ListItemsOut = $(CurrentInstalledOptionText) [SelectDriverDlgENG] Continue = "&Install" Cancel = "Cancel" Help = "&Help" DlgType = "MultiCombo" DlgTemplate = "SELECTDRIVER" Caption = $(OptionString8) DlgText = $(OptionString9) HelpContext = $(!HelpID2) Combo1Label = $(OptionString10) Combo1List = $(OptionTextList) Combo1Out = *($(Combo1List), ~($(OptionList), $(NewOption))) ComboListItemsIn = { Combo1List } ComboListItemsOut = { Combo1Out } NotifyFields = { YES }